Aramid Fiber Kevlar® Pulp PRODUCTS

Manufacturers Of Aramid Fiber Kevlar® Pulp

MARSHALL Para-aramid KEVLAR® pulp is obtained after surface fibrillation treatment of para-aramid KEVLAR® fibers. Its unique surface structure greatly improves the grip of the mixture, so it is very suitable as a reinforcing fiber for friction and sealing products.

MARSHALL Para Aramid KEVLAR® pulp light yellow flocculent, fluffy, rich hairiness, high strength, good dimensional stability, no brittleness, high temperature resistance, corrosion resistance, toughness, small shrinkage, good wear resistance, It has a large surface area and can be well combined with other substances. It is a reinforcing material with a moisture regain of 8%, an average length of 2-2.5mm, and a surface area of 8m2/g. It is used as a gasket reinforcement material, has good resilience and sealing performance, and is harmless to human health and the environment. It can be used as a medium seal for water, oil, hydrocarbons, and medium-strength acids and alkalis. The resulting gasket has excellent sealing performance and creep relaxation resistance.

MARSHALL Usually only need to add less than 10% pulp, the strength of the product is equivalent to 50-60% asbestos fiber reinforced products. It is used to enhance friction and sealing materials and other manufactured products. It can be used as a substitute for asbestos in friction and sealing materials, high-performance heat-resistant insulating paper and reinforced composite materials.

People is often looking to deliver products with added strength, higher resistance to heat and chemicals, and consistent internal structures. Because of its unique chemical and mechanical properties, Twaron® pulp addresses many of these market demands. To help our customers find optimal solutions for their specific applications, we provide both wet and dry pulp in different fiber lengths and with varying degrees of fibrillation.

MARSHALL Para aramid ( Kevlar® Pulp ,Taparan Pulp, Twaron pulp, Dupont Pulp) can help manufacturers to deliver superior strength, stability and resistance to heat and corrosive chemicals. It is easily integrated into production processes, as its fibrillated nature limits separation and aids the dispersal of other ingredients, delivering extra reinforcement and efficiency where it is needed. We have the broadest aramid pulp portfolio on the market, and offer solutions for numerous applications, including friction products, sealing materials, and specialty paper products.

• Delivers excellent strength-to-weight
• Improves heat and chemical resistance
• Reduces product brittleness
• High fibrillation
• Versatile and adjustable

Specifications :

PROPERTY	SEPCIFICATION			TEST METHOD TAPPI
	Nominal	LOW	HIGH
Canadian Standard Freeness (ML)	260	160	360	T-227
Fiber Length (MM)	--	--	--	T-271
Weighted Average	1.17	0.92	1.42	--
Moisture (%)		5.0	11.0	T-210
Bale weight (KG)	5.05	4.8	5.4	--
Bale weight (LBS)	11.1	10.5	11.9	--

Properties of MARSHALL Para aramid KEVLAR® pulp

• Highly fibrillated short fibers (0.5–1 mm)
• NATURAL yellow
• Operating temperature range from -200 to +350°C
• Specific gravity of 1.45
• Specific surface area of 7–11m2/g
• Bulk density of 3–10 lb/ft3

High temperature resistance, fire and flame retardant, light weight, high strength, high modulus, stable size, low shrinkage, puncture resistance, cutting resistance, wear resistance, heat resistance, chemical corrosion resistance, good mechanical properties, dielectric properties Good and other advantages.

Application

• Friction material: brake pads, clutch linings
• Sealing material: sealing gasket, cylinder head gasket
• Industrial paper: heat-resistant insulating paper, industrial special paper
• Construction materials: foundation roof materials ,Honeycomb plate for High-speed trains, airplanes
• Reinforcement material: steel bar substitute material
• Cement reinforcement, specialty paper products
• Para Aramid Pulp for Greater Performance in Vehicles
• Para Aramid Pulp helps enhance performance through high temperature
• Reinforcement and viscosity control.

MARSHALL Para Aramid KEVLAR® pulp are highly fibrillated fibers that can be used as specialty additives to enhance performance by helping to provide excellent reinforcement and viscosity control under shear stress. Kevlar® Aramid Pulp is used in automotive brake pads, gaskets, and automatic transmission papers, and as a viscosity control additive for adhesives and sealants.

MARSHALL Para-aramid KEVLAR® pulp is a highly fibrillated fiber used as a specialty additive to improve performance by providing excellent reinforcement and viscosity control under shear stress, para-aramid pulp is used in automotive brake pads , gasket and automatic transmission papers, and viscosity control additives as adhesives and sealants.

MARSHALL Para-aramid KEVLAR® pulp Used as a gasket reinforcement material, it has good resilience and sealing performance, and is harmless to human health and the environment. It can be used for sealing media such as water, oil, hydrocarbons, and medium-strength acids and alkalis. The gasket has excellent sealing performance and creep relaxation resistance. The strength of the obtained product is equivalent to that of a product reinforced with 50-60% asbestos fibers. Usually only need to add less than 10% pulp.